HisDivineShadow wrote:I think you've either found that UnleashX appears to allow you to change the video settings even in PAL mode but actually won't save them. Try changing them, Save, Exit and Reboot then go back to video settings and see if the changes are saved.
Alternatively it could be you're using a protected softmod and the resolution settings revert to what they were originally on reboot.
Whatever the case you first must region swap your PAL console to NTSC because that is the only version that supports 480p/720p/1080i. This is done using the Enigmah region changer which usually comes as default App with most softmods but is easily found here and other places.
Swap it to NTSC and then the 480p/720p video settings should stick although sometimes there can be problems with this. Going to the MS dash and setting them up there may resolve that problem should it appear.
If it still won't stick then you've likely installed a protected softmod and the method of changing the resolution settings will depend on what installer you used. The best ones make that very easy.
zxcvbnm wrote:Like the others say, change region to NTSC using Enigmah
EDIT: Glad you got it solved. Was it necessary for you to go to the M$ Dash?