Zer0-2k11's modchips,installs and premods [Canada->Int'l]

[zer0-2k11]

Located In Canada, Prices are in Canadian dollars. Will Ship Worldwide

Send me a pm with your order to order. Discount available with large quantity orders.

All orders will be shipped within 1 - 3 business days of purchase, and diagrams will be sent to you as soon as possible.

PS1.

$7.50 for a modchip code of your choice, pre-wired and color coded for an easy installation experience. (In Stock!)



Here are the best chips based on your console's model and region.

Mayumi V4 = SCPH-5xxx to scph-10x (Excluding the SCPH-102 PAL console).
Stealth 2.8a = SCPH-100x Series (Does not play all protected games but the best you can get for this series)
ONEChip = SCPH-102 (PAL). (Comes with some wire for the optional "NTSC Color FIX" if you want to play NTSC games properly)

Let me know which model and region your console is so i have the right chip ready for your model and region (It's Located on the bottom of the console).
i.e
SCPH-5500 NTSC-J
SCPH-7501 NTSC-U/C
SCPH-102 PAL

$2.50 Ceramic Spindle Hub



PS2
$10 Modbo 4.0 v1.93 (In Stock!)
(Add 3$ for v12 PS2 Laser Fix Set - Set includes the stuff needed for the summ0ne fix and Matrix Pic Fix)



Nintendo 64
$5.50 RGB Mod Kit (Includes THS7314 Pre-Soldered to SOIC-8 -> DIP-8 Board, 0.1uf Decoupling Cap and 3x 75ohm Resistors) (In Stock!)
(Pre-wiring available for an extra $2)



GameCube
$10 XenoGC. (In Stock!)
$11 XenoGC W/ perfect slide switch for the region switch mod (Recommended for proper japanese language display and proper memory card saving fuction) (In Stock!)



Xbox 1
$10 Aladdin XT PLUS2 v4032 (Comes with Pin Header) (In Stock!)



Dreamcast

$4.50 Dreamcast Region Free Bios (Compatible with VA1/VA2 Dreamcast's only) (In stock!)



Ideal for
- Adding the MIL-CD exploit into your VA2 Dreamcast
- Direct playback of Imported Retail Dreamcast games (True region free, No need for boot discs, turning the console off etc.)

Your choice in which startup animation you would want your dreamcast to have, let me know when placing your order
- Katana Dev-Kit Start-Up Animation
- Retail (Original) Start-Up Animation

Sega Saturn

$5.50 Sega Saturn Region Free Bios (SMD Version, Open your console to see which version you have). (Low stock - Restock in Early to Mid-April)



$7 Sega Saturn Region Free Bios (DIP Version, Open your console to see which version you have). (In Stock!)



$27 Phantom Universal Mod-Chip (In Stock!)



The advantages to having a Saturn region free bios installed in your saturn are
- Frees up your Cartridge Expansion slot for external memory cards, original ram carts etc.
- Direct Retail Import playback, No need for any import player carts etc.
- Patch-Free Import backups, No need to patch your iso's anymore, just download Your iso, burn and play

Your choice in which bios/startup animation you would want for your saturn.
Japanese Bios V1.01
USA Bios V1
European Bios V1
V-Saturn v1.01 - Not guaranteed to work with other saturns beside the V-Saturn)
Hi-Saturn v1.01 - Not guaranteed to work with other saturns beside the Hi-Saturn)

Shipping cost for chips only - (Prices listed are for regular mail *No Tracking #*, Faster shipping with tracking is extra, PM for a quote)

$3.50 - Canada (Estimated Shipping Time - 2 -10 Business days)
$4.50 - USA (Estimated Shipping Time - 4-10 business days)
$5.50 - International (Estimated Shipping time 7-20 business days)

Please note that with certain countries, i might require the use of a trackable shipping method, depending on the value of the order and/or the destination.

US and International - Please note that orders may be held by Customs and may take a bit more time. The estimated shipping time are usual times customers receive orders but should not be taken as guaranteed. If you don't see your order within 5 additional business to the times above, please contact me, i'll be sure to make things right

Installation Service . (Chip is included in price, Tracking and Insured shipping must be used for return shipping. NTSC consoles only at this time. Please note if i did not receive your console because you didn't use insured shipping i will *NOT* be held responsible.)
$25 + Return Shipping, PS1 Modchip Installation
$45 + Return Shipping, PS2 Modbo 4.0 (Laser Fixes are free with the service if required.)
$30 + Return Shipping, Aladdin XT
$25 + Return Shipping, Nintendo 64 RGB Mod Installation (NUS-CPU-1 to NUS-CPU-4 motherboards only)
$35 + Return Shipping, XenoGC (Will Adjust POT for proper mini DVD-R playback. Price includes region switch mod, if you want it done just let me know when you make your order)
$30 + Return Shipping, Sega Saturn Region Free Bios Installation (VA0 DIP Saturns)
$30 + Return Shipping, Sega Saturn Region Free Bios Installation (SMD Saturns)
$30 + Return Shipping, Dreamcast Region Free Bios Installation (VA1 - VA2 Dreamcasts Only)
$20 + Chip + Return Shipping, Sega Saturn Modchip Installation


Pre-modded Consoles (All pre-modded consoles for sale are in NTSC-U/C Format, Insured shipping must be used)


Return/Exchange Policy

All Do-It-Yourself (DIY) item's are eligible for a refund/exchange on defective items but if the item(s) has a high value, buyer is required to send the item back at their expense. I pay the shipping cost on replacements for the way back. If i find the item has been incorrectly installed, misused, abused or tampered with by the user (e.g: Hooking up a +12V line into a required +5v line, installing with improper equipment, temperatures and/or skills), no refund/exchange will be issued and the item will be sent back to you at your own expense.

All Installs/Premodded consoles are eligible for a exchange/repair within 60 days of shipment. buyer is required to send the item back at their expense. I pay the shipping cost on repair/exchange for the way back. If the console has had it's warranty sticker tampered with or the console has been deliberately damaged or misused, i will not issue a refund or exchange and the console will be sent back at your expense. Although i do try to describe the condition of the premodded console and take pictures as best as i possibly can, i do not accept refunds/exchanges on cosmetic condition.


Feedback
http://assemblergames.com/l/threads/zer0-2k11.41544/

[vga]

Prices for your consoles meet or beat what other modders here offer the systems for.
It's good to know that we have someone in CA that can offer the same services that I do here in the US, and that others offer in the UK. We need more professional modders around here to save others on the shipping costs.

You might want to PM a mod or Jambo to see if you can get permissions to list your items in the marketplace here while premium membership services are down. It's free to list, and TIZ does not take anything from the sale. They just provide us to tools for the trade.
Quite nice actually.

It's very ebay like, and will let you start to build up some reputation here as a positive seller so that folks know they can trust you.

You might want to offer up a link to you ebay feedback rating, etc in the mean time so that others can have confidence that you are in fact legit.

I gotta say... that those prices, you are giving your services away on PS2 mods.
Those consoles are a BEAR to do. I'm a professional modder, have been for 15+ years, and I won't even do them. To much work for too little money.

You should have no problem moving those consoles at those prices!

Let me know if there is anything I can do to help.
Good luck with the sales!

[Chaosmountain]

I gotta say... that those prices, you are giving your services away on PS2 mods.
Those consoles are a BEAR to do. I'm a professional modder, have been for 15+ years, and I won't even do them. To much work for too little money.

I agree with you on the PS2 chip installs, but then again, shipping a box to Canada from the U.S. is not cheap and then you have to deal with customs back and forth, how you would get around the duty/import fees/taxes I don't know seeing as it is not being sold ?
The last Xbox I shipped to Canada was mad expensive, but I am sure a PS2 slim would be MUCH cheaper as it weighs a fraction of the cost but still.

I was going to say something about the prices because I thought it would end up being more in U.S. $ converted to Canadian $ but I just checked online and it seems it will end up being less in U.S. $$, not much, like a few cents on $10.00, even if it was more in U.S. $ it would not matter as it's still a good deal for any of those items!!

[zer0-2k11]

Prices for your consoles meet or beat what other modders here offer the systems for.
It's good to know that we have someone in CA that can offer the same services that I do here in the US, and that others offer in the UK. We need more professional modders around here to save others on the shipping costs.

You might want to PM a mod or Jambo to see if you can get permissions to list your items in the marketplace here while premium membership services are down. It's free to list, and TIZ does not take anything from the sale. They just provide us to tools for the trade.
Quite nice actually.

It's very ebay like, and will let you start to build up some reputation here as a positive seller so that folks know they can trust you.

You might want to offer up a link to you ebay feedback rating, etc in the mean time so that others can have confidence that you are in fact legit.

I gotta say... that those prices, you are giving your services away on PS2 mods.
Those consoles are a BEAR to do. I'm a professional modder, have been for 15+ years, and I won't even do them. To much work for too little money.

You should have no problem moving those consoles at those prices!

Let me know if there is anything I can do to help.
Good luck with the sales!

Bump

This might be a late reply but thank you vga, i noticed on alot of forums i goto, there were no CA installers so i figured i would take up the opportunity as being a CA modder . I also enjoy modding as well so it makes things much better when working. I tried contacting JaMbO awhile back about adding my stuff to the marketplace but i guess since im the new guy, it think its pretty much a no go. I'll be signing up for Premium if available very soon, i just stocked up on some Dreamcast and Saturn Region Free chips so money is low. Adding eBay feedback now, im only a buyer on ebay but i guess its better than nothing. I did a little price adjust my installation price for ps2s, as much as i enjoy doing it, i'm starting to notice it being a bit time consuming.

I agree with you on the PS2 chip installs, but then again, shipping a box to Canada from the U.S. is not cheap and then you have to deal with customs back and forth, how you would get around the duty/import fees/taxes I don't know seeing as it is not being sold ?
The last Xbox I shipped to Canada was mad expensive, but I am sure a PS2 slim would be MUCH cheaper as it weighs a fraction of the cost but still.

I was going to say something about the prices because I thought it would end up being more in U.S. $ converted to Canadian $ but I just checked online and it seems it will end up being less in U.S. $$, not much, like a few cents on $10.00, even if it was more in U.S. $ it would not matter as it's still a good deal for any of those items!!

The currency rate is up and down sometimes its even 1:1 sometimes its a few cents less or more.

The Customs fees are avoidable if you ship with goverment owned post services (Canada Post, USPS).

The Customs fees are avoidable if you ship with goverment owned post services (Canada Post, USPS).

[Agent_Koopa]

Sega Saturn chips you say? Tell us more please (price,capabilities).
Any chance that you could up a picture of your PS2 mod-chip work? Jinn used to do that, and man it was impressive stuff. @90$ plus like 30$ shipping = that is an investment for me
Thank you, have a nice Sunday.

[zer0-2k11]

Details of the chips are above

Here is a install on a scph-77001. I was working on a new wire management technique so it may be a bit messy.

[zer0-2k11]

MM3 Install on a SCPH-9001 (PU-23)

[shawnunder7]

Do you still have any Xbox modchips?

[zer0-2k11]

Overdue bump

[zer0-2k11]

Bump!

[desmondk252]

I need some chips I'm new to this site and using android phone bad combo lol

[Shekky]

bumping your thread I pmed you on a request thanks!

[vga]

Bought some chips from him to assist in speeding up some of my installs.
He was a HUGE lifesaver.

Shipped the chips quick and offered them up at a great price.
Came pre-wired, and with great installation instructions.
Even gave me free postage from Canada to the US on the order!

Just from the color coating and the wiring I can tell he offers very professional services.

Thanks again for helping me out. If I get any more of these SCPH-1001 consoles in I'll be hitting you up for some more chips.

[beard01]

Hello, I just wanted to say that I just bought a chipped psx off this guy and all went fine.
thanks again man.

[elitetecke]

Is this solderless and will it work on a original crystal 1.4 xbox.
Aladdin XT PLUS2 v4032
And how much to post and ship to the UK?
Thanks much obliged.

[zer0-2k11]

Is this solderless and will it work on a original crystal 1.4 xbox.
Aladdin XT PLUS2 v4032
And how much to post and ship to the UK?
Thanks much obliged.

Hi, eliteteck
Aladdin XT will work any xbox . Postage to UK is 6$ Canadian

[elitetecke]

Is it a solder less lpc header? or do I need to solder it into the lpc holes also where would be the best spot to solder the d0 cable? Thanks.

[zer0-2k11]

Is it a solder less lpc header? or do I need to solder it into the lpc holes also where would be the best spot to solder the d0 cable? Thanks.

you would need to solder a pin header in the LPC holes ( Chip comes with pin header),
the best d0 point is the bottom of the mobo. Here is my aladdin xt installation and information folder if you would want to take a look .

http://s1150.photobucket.com/user/zer0- ... t=3&page=1

[Shekky]

Alright so I recieved my Xbox turned out to be a 1.6 and he gave me an Aladdin XT on top of it. Installed UnleashX and Xbmc (Exactly what I wanted too) Anyway system is running great does great work! Thanks for the excellent service!

[Shekky]

Received my ps2 from zer0 today nice work had trouble getting the formula to burn ps2 games but all is working perfectly now.